Construction method statement for excavation

What is excavation method statement? What are the methods of excavation for deep foundation construction? At the start of the project, in most projects I joined with, one of the activities shall be implemented or started first is excavation. You may copy this Method Statement and submit to the Engineer but please take a while to read your specification first as this may differ from it and revision will be needed. A method statement will be prepared and approved where deemed necessary, and may include: i) Site plan showing the location of spoil heaps for temporary storage and if appropriate permanent storage area.

Type of plant and equipment to be used. Means for keeping excavations free of water. This method statement for excavation defines the sequence and control procedures to be followed for excavation works (Open-cut excavation up to formation level) in the construction projects.

This process also provides practical guidance to manage health and safety risks associated with excavation activity. There are number of excavation methods which are used for deep foundation construction such as full open cut method , bracing excavation , anchored excavation , island excavation methods,zoned excavation , top down construction methods etc. These excavation techniques are discussed.

EXPLORE VIP Membership Fig. Excavation for Deep Foundations Contents: Excavation Methods for Deep. However, the exact method to be adopted still depends upon a number of factors: 1. Nature of subsoil – affect type of machine used and the necessity of soil protection. Size of excavation – affect type of machine used and method to excavate.

Scale of work – large. An effective construction method sheet contains all the details about the whole construction process. Conduct a survey and mark the location and the limits of the area to be excavated. Allowance should be provided to have enough working space between the foundation to be constructed and the edge of the bottom of the excavation for the personnel and forms, bracing and. In construction terms, excavation is the process of removing earth to form a cavity in the ground.

On small sites or in confined spaces, excavation may be carried out by manual means using tools such as picks, shovels and wheelbarrows. Larger scale excavation works will require heavy plant such as bulldozers and backactors. The law says you must prevent danger to workers in or near excavations. To maintain the required precautions, a competent person must inspect excavation supports or bat. Easy To Use Software.

Ready To Get Started? Restrict access to the work area to only those involved in the activity and make sure it is kept clear at all times. Your RAMS In Minutes. A construction method statement template is a tool used by the construction industry to manage work and ensure that necessary precautions are set and communicated to workers involved.

Below is given a safe work method statement for performing the excavation works for different purposes like piping, trenching, man hole and cable laying etc. The procedure is given in main steps and other considerations must be kept in the view. Ensure all clearances from the concerned government department are obtained. Selected working area. Although above information is sufficient in order to develop and good method statement.

But there are some clients who need detailed method statement mentioning lot of things. Construction Method Statement Example for Large Projects. In that case you can use our sample method statement given below or follow below table of content. Method statement for construction project is a mandatory requirement even sometimes at the pre-qualification stage of a construction contractor.

Any reputable building construction company will follow best construction methods in order to provide best quality of work.